Mediante la comprensión de la luz y el sonido, se crean soluciones de Seguridad eficientes y fiables.
Desarrollamos productos de señalización para sitios industriales y entornos peligrosos para aumentar la productividad. Desde los puertos hasta las minas, desde las fundiciones hasta los edificios altos, desde las autopistas hasta los buques oceánicos, nuestros investigadores se han comprometido a proporcionar seguridad y estabilidad en entornos industriales exigentes mediante el diseño de iluminación.
Los productos de alta calidad se utilizan ampliamente en señales de edificios altos, señales de Torres de telecomunicaciones, señales de obstáculos de carretera, ayudas a la navegación, puertos, entradas y pasarelas de muelles, señales de boyas, plataformas petrolíferas y de gas en alta mar, luces de helipuerto, luces de pista, etc.
Uno de los elementos básicos de la gestión de las relaciones con los clientes, que puede ayudar a las empresas a satisfacer las necesidades únicas de los clientes con mayor velocidad y eficiencia.
Centro de noticias en línea, rodando la información educativa más reciente todos los días, viendo los puntos calientes de la educación en profundidad, incluyendo comentarios educativos, listas de noticias educativas calientes, columnas de entrevistas en profundidad, informes especiales, etc., mostrando puntos de vista de la educación omnidireccional y multi - ángulo
Hunan yuansheng Electronic Technology Co., Ltd. Es un fabricante chino de luces de obstrucción aérea,Luces de Obstrucción, luces de navegación marina,Linterna marina LED, Iluminación de Helipuertos.
La comunicación es un proceso de transmisión y retroalimentación de pensamientos y sentimientos entre personas y grupos, con el fin de llegar a un acuerdo sobre pensamientos y sentimientos.
Taking China as an example, the azimuth angle of the solar aviation obstruction light panel in the middle light intensity is generally in the south direction, which can make the power generation of the LED solar panel per unit time reach. If it is limited by the installation site of LED solar street lamp, such as roof, earth slope, mountain, building structure and shadow, it is necessary to consider how to make full use of the existing terrain and effective area, and try to avoid the shadow generated by surrounding buildings, structures or trees. As long as it is within ± 20 ° to the south, it will not have a great impact on the power generation. If conditions permit, it should be within 20 ° to the southwest as much as possible, so that the peak of solar power generation will appear at a certain time after noon, so as to generate more power in winter. When the laying area of solar panels in the south direction is not large enough, the solar panels can also be laid in the East and west directions.
The ideal tilt angle is to make the annual power generation of LED solar obstruction light as large as possible, and make the difference between winter and summer power generation as small as possible. Generally, the local latitude or local latitude plus several degrees is taken as the inclination angle of the local solar cell module installation. Of course, if the computer-aided design software can be used, the optimization calculation of the inclination angle of solar energy can be carried out, so that both can be considered better. This is particularly important for high latitude areas. The difference between the horizontal solar radiation in winter and summer in high latitude areas is very large. If the design is based on the horizontal radiation parameters, the storage capacity of battery in winter is required to be too large. As a result, the design capacity and investment of the battery are increased. When the tilt angle is selected, the difference between the radiation in winter and summer on the solar panel becomes smaller, and the capacity of the battery can also be reduced, so as to obtain an equilibrium, reduce the cost of the whole solar obstruction lighting system, and make the design more reasonable.
There is no reason why the solar panels are placed obliquely. If the solar panels are placed on the equator, they do not need to be placed obliquely. The location of the solar panels needs to be changed according to the change of location.