YML2000B LED Based Medium Intensity Aviation Obstruction Light-Aviation obstruction light-Yuansheng electronic

YML2000B Middle intensity aviation obstruction light （Type B） for marking Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a flashing red safety light. Compliant to ICAO standard.
The enclosure of YML2000B warning light is made of die casting aluminum with powder coated finish, light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Steel wire is used to connect to base against falling in operation

Specifications:

Description	Parameter
International standard	ICAO（Annex）Type B; FAA-L864
Light source	LED
Supply voltage	AC110V ~ AC240V /DC24V~DC60V
Color	Red / White
Power consumption	<10W ( 30 FPM )
Intensity	2000cd±25%
Vertical degree	3°
Horizontal degree	360°
Flashing rate	30FPM(20/60FPM/steady burning can be customized
Flashing duration	150±10ms
LED life	≥100,000h
On/Off level	50lux
Customized	GPS/ photocell
Ambient temperature	-40℃ ~ +60℃
Humidity	10% ~ 95% (no coagulation）
IP Protection	IP65
Material	Base：Aluminum alloy Housing：PC
Weight	5.6Kg

Functions & Features
• Based on LED technology, meets optics standard.
• Built-in circuit protect LED, extremely reliable and cost saving.
• Shockproof and corrosion resistant. Working environment temperature ：-40℃ ~ +60℃，It can be used in very poor conditions .
• It contains connection box and installation with conventional screw.
• PC lamp housing with the sound impact resistance, thermal stability and luster effect. A variety of installation is aviation.
• Sealing material: waterproof sealing ring.
• Combustibility rating：UL94-V0.
• Flashing mode or stead burning is available and it do not need controller.
• LED is aviation special red color，Typical LED lifetime is more than 100，000 hours.
• With high power LED，and LED parallel connect, with low voltage constant current power supply, any LED fault will not affect others, with high stable and eliable of the lights.
Installation and Operation
• Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.
• When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.
• Make sure the power supply can match the rated power of light before connecting.
• Insert the power cable from the gland box and then connect them to the corresponding terminals inside the lamp body.
• Check whether the power cables are connected correctly before power on.
Notice
• Check whether the power cables are connected correctly before power on
• Please do not open the control box by yourself

connecting terminal

Order codes

Series

Siger/Double

AC/DC(交流、直流）

Flashing

Photosensor

Alarm

relay

Pattern(For double light only)

YML2000B

S（单灯）

A

F(闪烁）

P

R

ST（工作+备用）

D（双灯）

D

S(常亮）

SS（工作+工作）

For example YML2000BDASPRST means AC-YML2000B works in “Service+Standby” With Photosensor with alarm relay output
YML2000BDxxxx medium aviation light only works with control box.
YML2000BSDXXX medium aviation obstruction light all can work at DC24~DC60.

YML2000B LED Based Medium Intensity Aviation Obstruction Light.pdf